Positioning Your Swing:

The swing is designed to be installed on a level surface.
There should be a minimum clearance of four feet in front and back, and two feet on each side of your swing. It should be placed in an area where children will not stray or walk into the path of the swing.

Before using, the swing must be anchored to the ground, patio or deck with the holes in the base plate. See your local hardware retailer for suggestions on fasteners or stakes for your particular support surface.

1. At least 2 people are required to assemble this swing. Some parts are large and heavy. Use care when handling.
2. Identify all of the parts for your swing. Empty the box and lay out the parts for identification using the Parts List.
3. Read all the way through the instructions completely before beginning the assembly.
4. Do not tighten hardware completely until instructed. It helps to have some adjustment for bolt alignment while you are connecting parts. Follow the tightening sequence as mentioned in the in steps.

After you have completed the assembly, recheck that all hardware is secure and tight.